Wooden door manufacturers explain in detail severa

2022-07-22
  • Detail

When painting the wall, use waterproof materials without corrosion and melting to cover the wooden door, so as to prevent the paint from adhering to the surface of the product, causing peeling and fading, affecting the overall beauty

Fujitsu air conditioner (Vaux) Maxim steel wood interior door

I. before installation

1 When painting the wall, use waterproof materials without corrosion and melting to cover the wooden door, so as to prevent the paint from adhering to the surface of the product, causing peeling and fading, affecting the overall beauty

2. The wooden door must be horizontally placed on the ground (the stacking height should not exceed 1 meter) before installation. Do not lean against it to avoid deformation

3. Try to avoid outdoor sunshine for a long time to prevent the wooden door from being heated

4. Put it in a dry room, and keep the indoor air circulation to prevent the wooden door from getting damp

5. Prevent the wooden door from abnormal impact or contact with corrosive substances

6. Before installation, the door opening must undergo necessary moisture-proof and anti-corrosion treatment

II. After installation

1 When using wooden doors, do not hang heavy objects on the door leaves or avoid sharp objects from bumping and scratching

2. When opening or closing the door leaf, do not force too hard or open the angle too large to avoid damage

3. When maintaining the wooden door with glass, be careful not to infiltrate detergent or water into the gap of the glass batten to avoid deformation of the batten. Don't use too much force when wiping the glass, so as to avoid glass damage and personal injury. After the glass is broken or there is a big bump, it must be repaired by professional maintenance personnel

4. When removing the dirt on the surface of the wooden door, wipe it with a soft cotton cloth. It is easy to scratch the surface with a hard cloth. When the dirt is too heavy, you can use neutral detergent, toothpaste or special detergent for furniture. Wipe it dry immediately after the detergent

5. Pay attention to the cloth soaked in neutral detergent or containing high moisture. Do not place it on the surface of the wooden door for a long time, otherwise it will damage the edge surface, causing the surface to change color, age or peel off. 6. Do not touch high-temperature objects to avoid damage

7. Pay attention not to rub too much at the edges and corners of the wooden door, otherwise it will cause the corner paint to fall off

8. When removing dust from wooden products, and it is inconvenient to use soft cotton cloth to wipe, you can use a vacuum cleaner to remove it. In order to maintain the gloss and service life of the wooden door, it should be cleaned and dedusted regularly

9. In order to maintain the bright color of the wooden door, furniture maintenance wax should be used regularly for its maintenance

10 When using wooden door products, try to keep the indoor air relative humidity between 60%-75%. In spring and winter, pay attention to good indoor ventilation, maintain indoor humidity, and keep the wooden door at normal room temperature and humidity, so as to prevent the product from deformation due to excessive humidity difference, corrosion of metal accessories, and falling off of edge sealing and finishing materials. When using electric heating or other heating equipment in winter, keep away from wood products to avoid heating deformation or surface damage

11. When the hinge and lock are loose, the accessories that often move should be tightened in time. When the hinge position makes a sound, oil should be injected in time. When the lock is not flexible to open, add an appropriate amount of pencil lead foam to the key hole, and do not inject lubricating oil casually

12. When there is partial peeling on the edge of the wooden door, iron it firmly with an iron pad dry cloth

13. The yellowing of the white paint door should be attributed to the oxidation of the paint film. Avoiding the yellowing of the white paint door is to prevent oxidation, which is the key to preventing oxidation and avoiding direct sunlight exposure

14. Because the wood has the characteristics of dry shrinkage and wet expansion, under the condition of large temperature and humidity differences, it is a normal natural phenomenon to have slight cracking or shrinkage. With seasonal changes, this phenomenon will naturally disappear

成都性病医院

太原性病医院

长春性病医院

赣州皮肤病医院

Copyright © 2011 JIN SHI